Maytag MSD2748DRA Refrigerator Manual

The Maytag MSD2748DRA is a side-by-side refrigerator designed for efficiency and convenience. It features a spacious interior with adjustable shelves, a water and ice dispenser, and energy-efficient cooling technology. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using the Ice Maker 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Side-by-side design, adjustable shelves, water and ice dispenser, energy-efficient cooling.

Feature	Description
Water Dispenser	Provides chilled water on demand
Ice Maker	Automatically produces ice cubes
Adjustable Shelves	Customizable storage space
LED Lighting	Bright and energy-efficient interior lighting
Temperature Control	Precise temperature settings for optimal food preservation

Installation

Unpack and inspect contents. Ensure the refrigerator is placed on a level surface.

Connect the water supply: Follow the instructions for connecting the water line.
Plug into a grounded outlet: Ensure proper electrical connection.
Level the refrigerator: Adjust the leveling legs as needed.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the refrigerator and set the desired temperature.

Set the refrigerator and freezer temperatures using the control panel.
Allow 24 hours for the refrigerator to reach the desired temperature.
Fill the ice maker with water and allow it to start producing ice.

CAUTION! Do not overload the refrigerator during the initial setup.

Specifications

Model: Maytag MSD2748DRA
Type: Side-by-side refrigerator
Dimensions: 69.5" H x 35.5" W x 33.5" D
Capacity: 27 cu. ft.
Energy Star Rated: Yes
Power Source: 115V, 60Hz
Weight: Approximately 250 lbs.

Controls and Settings

Access temperature settings via the control panel located on the front of the refrigerator.

Features: Temperature control, ice maker settings, and water dispenser controls.

Connecting Water Supply

Follow these steps to connect the water supply for the ice maker and water dispenser.

Locate the water supply line and connect it to the refrigerator.
Turn on the water supply and check for leaks.
Ensure the ice maker is turned on to start producing ice.

Tip: Use a water filter for better tasting water and ice.

Using the Ice Maker

The ice maker automatically produces ice cubes. Follow these steps to use it.

Ensure the water supply is connected.
Press the ice maker switch to the ON position.
Check the ice bin regularly and empty as needed.

WARNING! Do not overload the ice bin to prevent jams.

Maintenance and Care

Regular maintenance ensures optimal performance. Follow these tips for care.

Clean the exterior with a soft cloth.
Check and clean the condenser coils regularly.
Replace water filters as recommended.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check power connection and settings.
Ice maker not working	Water supply issue	Ensure water line is connected and turned on.
Noise from refrigerator	Compressor operation	Normal operation; check for loose items.
Frost buildup	Door seal issue	Check door seals for damage; replace if necessary.

Service: For further assistance, contact Maytag customer service.