Maytag MSD2757AEA Refrigerator Manual

The Maytag MSD2757AEA is a side-by-side refrigerator designed for efficiency and convenience. It features a spacious interior with adjustable shelves, a water and ice dispenser, and energy-efficient cooling technology. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using the Ice Maker 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Side-by-side design, adjustable shelves, water and ice dispenser, LED lighting, energy-efficient compressor.

FeatureDescription
Water DispenserProvides chilled water on demand
Ice MakerAutomatically produces ice cubes
Adjustable ShelvesCustomize storage space as needed
LED LightingBright and energy-efficient interior lighting
Temperature ControlDigital controls for precise temperature settings

Installation

Unpack and inspect contents. Ensure proper ventilation around the refrigerator.

  1. Connect water supply: Follow instructions to attach water line.
  2. Level the refrigerator: Adjust feet for stability.
  3. Plug into AC power: Ensure outlet is grounded.

WARNING! Refrigerator is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on refrigerator; allow 24 hours to reach optimal temperature.

  1. Set temperature: Use digital controls to set desired cooling levels.
  2. Fill ice maker: Ensure water supply is connected for ice production.

CAUTION! Ensure refrigerator is level for proper operation.

Specifications

Controls and Settings

Access temperature settings via the digital control panel located on the front of the refrigerator.

Features: Temperature settings for both refrigerator and freezer, ice maker on/off switch, water filter status indicator.

Connecting Water Supply

Ensure proper connection to the water supply for the ice maker and water dispenser.

  1. Locate the water supply valve.
  2. Connect the water line to the refrigerator.
  3. Turn on the water supply and check for leaks.

Tip: Use a water filter for cleaner drinking water.

Using the Ice Maker

To use the ice maker, ensure it is turned on and the water supply is connected.

  1. Press the ice maker switch to the ON position.
  2. Wait for ice production to begin (may take several hours).
  3. Dispense ice using the ice dispenser.

WARNING! Do not overload the ice bin; it may jam.

Maintenance and Care

Regular maintenance is essential for optimal performance.

  1. Clean the exterior with a soft cloth.
  2. Check and replace the water filter regularly.
  3. Defrost if necessary.

CAUTION! Unplug before performing any maintenance.

Regulatory Information

This refrigerator complies with all applicable safety standards and regulations. For support, visit www.maytag.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Refrigerator not coolingPower supply issueCheck power connection and circuit breaker.
Ice maker not producing iceWater supply issueEnsure water line is connected and valve is open.
Noise from refrigeratorCompressor operationNormal operation; check for loose items.
Water dispenser not workingClogged filterReplace water filter.

Reset: Unplug for 10 minutes to reset if necessary.

Service: 1-800-688-9900; www.maytag.com

Maytag MSD2757AEA Refrigerator Manual © - All Rights Reserved 2026